Welder Test Checklist

Welder Test Checklist

What Job welding Inspector before, during and after Welder Test ?

Below some checklist which can help you before Welder Qualification Test start :

No	Item Description	Check, Review, Verify
No	Item Description	Yes	No
	Before Welder Test Start
1	Proposed WQT ready on test location and complete with Attribute and Identification number welder(ID) ?	√
2	Welding Machine Calibration Record ?		√
3	Polarity as per approved WPS ?	√
4	Tang Ampere, Volt Meter, Temperature Gauge, Welding Gauge available on test location ?		√
5	Material test Mill Certificate, Electrode available and accordance with approved WPS ?	√
6	Positions of weld as per approved WPS or not ?	√
7	Check 1G,2G,3G,4G,5G,6G or…..?	√
8	Joint Design accordance with approved WPS ?	√
9	Check Angle, Root face, Root Gap, Thickness ?	√
10	Make Identification for test material(specimen) ?	√
11	Attended by all Party(clients,fabricator,3rd party, Government representative) ?	√

	During Welder Test Start
1	Record Start time of test ?	√
2	Record Ampere, Voltage, Temperature ?	√
3	Inspect Root penetration as per code/standard or not ?	√
4	Attend, inspect, review during test and record all non conformance out of proposed WQT ?		√
5	Sign result and data of proposed WPS ?	√

	After Welder Test Start
1	Review NDT result ?		√
2	Attending during Destructive Test ?		√
3	Review and Approve WQT as per Code/Standard ?	√
4	Copy and Keep(documentation/File) Approved WQT with WQT Registered	√

by online welding courses – non destructive testing

Comments

2 Responses to "Welder Test Checklist"