PQR / WPS Test Checklist

PQR / WPS Test Checklist

What Job welding Inspector before, during and after PQR / WPS Test(procedure qualification test) ?

Below some checklist which can help you before PQR / WPS Test(procedure qualification test) start :

No	Item Description	Check, Review, Verify
No	Item Description	Yes	No
	Before Procedure Qualification Test Start
1	Proposed WPS ready on test location or not ?	√
2	Welding Machine Calibration Record ?	√
3	Polarity as per proposed WPS ?	√
4	Tang Ampere, Volt Meter, Temperature Gauge, Welding Gauge available on test location ?	√
5	Material test Mill Certificate, Electrode available and accordance with proposed WPS ?	√
6	Positions of weld as per proposed WPS or not ?	√
7	Check 1G,2G,3G,4G,5G,6G or…..?	√
8	Joint Design accordance with proposed WPS ?	√
9	Check Angle, Root face, Root Gap, Thickness ?	√
10	Make Identification for test material(specimen) ?	√
11	Attended by all Party(clients,fabricator,3rd party, Government representative) ?	√

	During Procedure Qualification Test Start
1	Record Start time of test ?	√
2	Record Ampere, Voltage, Temperature ?	√
3	Inspect Root penetration as per code/standard or not ?	√
4	Attend, inspect, review during test and record all non conformance out of proposed WPS ?	√
5	Sign result and data of proposed WPS ?	√

	After Procedure Qualification Test Start
1	Review NDT result ?	√
2	Attending during Destructive Test ?	√
3	Review and Approve WPS as per Code/Standard ?		√
4	Copy and Keep(documentation/File) Approved WPS with WPS Registered	√

by online welding courses – non destructive testing

Comments

0 Responses to "PQR / WPS Test Checklist"